Progressive-international-electronics PIcon Console Manual de usuario descargar pdf (Pagina 26)

PIcon Program & Report

Rev 2.0 June 2006

Page 22

Exit Mode 2 by pressing the <MNGR> key. The PIcon display returns to M 0, the mode

entry prompt. To exit programming mode completely and return to operator mode, press the

<MNGR> key again.

Mode 3 — Beeper Settings (Manager only)

Mode 3 is used to program single or continuous beeps for Handle, Collect and Drive-Away.

(Note: The console defaults to a single beep unless set otherwise.) To enter Mode 3 from M

0, the mode number prompt, enter <3> on the numeric keypad and press <ENTER>.

Handle/Call for Service — The display first will prompt for selection of the style of

beep associated with a Handle/Call for Service. To change the style of beep, press the

<SELECT> key and toggle between single and continuous. To proceed to the next

option setting, press <ENTER>.

Collect — The display now prompts for selection of the style of beep associated with a

Collect condition. To change the style of beep, press the <SELECT> key and toggle

between single and continuous. To proceed to the next option setting, press the

<ENTER> key.

Drive-Away — The display now prompts for selection of the style of beep associated

with a Drive-Away condition. To change the style of beep, press the <SELECT> key

and toggle between single and continuous.

Exit Mode 3 by pressing the <MNGR> key. M 0, the mode entry prompt, will appear on the

display. To exit programming mode completely and return to operator mode, press the

<MNGR> key again.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 36 37

Sin comentarios

Progressive-international-electronics PIcon Console Manual de usuario Pagina 26